Meanwell

“One Stop Shopping for all powers You Need” Switching power supply สินค้าคุณภาพที่ได้รับการยอมรับทั่วโลก ด้วยมาตรฐาน ISO 9001 ออกแบบและพัฒนาให้มีประสิทธิภาพสูงสุด แข็งแรง ทนทาน รูปแบบกะทัดรัด ง่ายต่อการติดตั้ง

Product Series

AC/DC> Enclosed- Enclosed Switching Power Supply

G3 Series

G3 Series

Wattage : 15W~150W
Features :
Miniature size, non-PFC
5G vibration, 70℃ operation
300VAC input surge
Suitable for critical applications
2 outputs are isolated for RID series

Model
Single:RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150
Triple:RT-50 / RT-65 / RT-85 / RT-125
Quad:RQ-50 / RQ-65 / RQ-85 / RQ-125

LRS Series

LRS Series

Wattage : 35W~350W
Features :
Non-PFC, most economical models
Ultra compact and 1U low profile
300VAC input surge
No load power consumption: 0.2W~0.75W
5G vibration, 70℃ operation
Operating altitude up to 5000 meters
Complete safety certificates: IEC/EN60335-1(PD3), IEC/EN61558-1, -2-16; IEC/EN/UL60950-1 and GB4943

SE Series

SE Series

Wattage : 100W~1500W
Features :
Non-PFC
Economical medium to high power models

Model :SE-450 / SE-600 / SE-1000 / SE-1500

PFC Series

 PFC Series

Wattage : 150W~1000W
Features :
• Built-in active PFC function
• Full range input, complete functions

Model :
Single:PSP-600 / PSPA-1000
Quad:QP-150 / QP-200 / QP-320

UHP Series

UHP Series

Wattage : 200W~2500W
Features :
Slim and Low profile
Fanless design,free air convection
Built-in active PFC function150%
peak load capability(100ms)
DC OK active signal and redundant function(option)
Operating altitude up to 5000 meter
LED indicator for power on

RSP-75~500 Series

RSP-75~500 Series

Wattage : 75W~500W
Features :
1U Low profile with active PFC function: 75W~320W: 30 mm, 500W: 40.5 mm
Built-in constant current limiting circuit (RSP-75/100/150)
Built-in remote ON/OFF control (RSP-75/100/150/500)
Built-in remote sense (RSP-500 only)

Model :RSP-75 / RSP-100 / RSP-150 / RSP-200 / RSP-320 / RSP-500

G5 Series

G5 Series

Wattage : 75W~1000W
Features :
Built-in active PFC function
High efficiency, no load power consumption <0.5W~0.75W
5 years warranty

Model :HRP-75 / HRP-100 / HRP-150 / HRPG-150 / HRP-200 / HRPG-200 / HRP-300 / HRPG-300 / HRP-450 / HRPG-450 / HRP-600 / HRPG-600 / HRPG-1000

MSP Series

MSP Series

Wattage : 100W~1000W
Features :
Medical level, built-in active PFC
Medical safety approved (MOOP level)
High efficiency, no load power consumption<0.5W~0.8W
5 years warranty

Model :MSP-100 / MSP-200 / MSP-300 / MSP-450 / MSP-600 / MSP-1000

HEP Series

HEP Series

Wattage : 100W~1000W
Features :
90~305VAC with PFC
Fanless design
High efficiency up to 96%
Wide working temperature range -55~+70℃
Rugged metal case with IP65 design (IP68 option available), withstand 10G vibration
Operating altitude up to 5000 meters
Suitable for high/low temperature, high dust, high moisture, high vibration, high salt outdoor or harsh environment
6 years warranty

Model
Single:HEP-100 / HEP-150 / HEP-185 / HEP-240 / HEP-320 / HEP-480 / HEP-600 / HEP-1000

Peripheral

Peripheral

Wattage : NA
Features :
20A/40A Power Supply Redundancy Module
Supports system 1+1 and 1+N redundancy
Two DC input contacts and single output
Built-in two channels DC OK relay contacts for monitoring power status

Model :ERDN20 / ERDN40

AC/DC> DIN Rail- DIN Rail Power Supply

HDR Series

HDR Series

Wattage : 15W~150W
Features :
Plastic case, step shape|
1∅, full range input
Compact size, 1SU~6SU width (DIN EN43880)
Isolation class II
DC output voltage adjustable
No load power consumption &lt;0.3W
Assemble on industrial rail TS-35 / 7.5 or 15
Suitable for building automation and control of household appliance

ICL Series AC Inrush Current Limiter

ICL Series AC Inrush Current Limiter

Wattage : NA
Features :
180~264VAC input
Built-in thermal fuse and bypass relay
Operation temperature -30~+70℃
2 installation options available:
DIN rail type ICL-16R/28R, can be installed on TS-35/7.5 or 15 DIN rails
Linear type ICL-16L/28L, can be installed on flat surface

Model
Din-Rail:ICL-16R / ICL-28R
Linear Shape:ICL-16L / ICL-28L

MDR Series

MDR Series

Wattage :10W~96W
Features :
Plastic case, ultra slim
1∅, full range input
No load power consumption<0.75W~1W
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in active PFC function
DC OK signal output (MDR-10/20)
DC OK relay contact (MDR-40/60/100)
Class I, Div 2 Hazardous Locations T4 (MDR-40/60)

Model :MDR-10 / MDR-20 / MDR-40 / MDR-60 / MDR-100

DRA Series

DRA Series

Wattage : 40W~60W
Features :
Plastic case
1∅, full range input
Io can be adjusted 10~100% by 1~10VDC, PWM signal or resistance
Assemble on industrial rail TS-35 / 7.5 or 15
Suitable for machine vision inspection system and plant cultivation applications

Model :DRA-40 / DRA-60

DRH/DRT Series

DRH/DRT Series

Wattage :120W~960W
Features :
Metal case
2∅ or 3∅, 340~550 VAC input
Fanless design

Model
2-phase:DRH-120
3-phase:DRT-240 / DRT-480 / DRT-960

EDR Series

EDR Series

Wattage :75W~150W
Features :
Metal case, low cost
1∅, full range input
Slim size, model width: 32 ~ 40mm
EMC EN55022 class A
Assemble on industrial rail TS-35 / 7.5 or 15
2 years warranty

NDR Series

NDR Series

Wattage :75W~480W
Features :
Metal case, economical models
1∅, full range input
Slim size, model width: 32 ~ 85.5mm
EMC EN55022 class B
Assemble on industrial rail TS-35 / 7.5 or 15
3 years warranty

Model:NDR-75 / NDR-120 / NDR-240 / NDR-480

SDR Series

SDR Series

Wattage :75W~960W
Features :
Metal case, slim size
1∅, full range input (230VAC only for SDR-960)
94% high efficiency and complete functions
Built-in active PFC function (except SDR-75)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact (except SDR-75)
130%~150% peak load capability by models
Current sharing function (SDR-480P/960)

Model
SDR-75 / SDR-120 / SDR-240 / SDR-480 /
SDR-480P / SDR-960

TDR Series

TDR Series

Wattage :240W~960W
Features :
Metal case, slim size
3∅, 340~550VAC input
High efficiency up to 94.5%
Built-in active PFC function
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact

Model:TDR-240 / TDR-480 / TDR-960

WDR Series

WDR Series

Wattage :60W~480W
Features :
Metal case, slim size
1∅ and 2∅ , 180~550VAC wide input
High efficiency up to 93%
Built-in active PFC function (240W & 480W)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact

Model:WDR-60 / WDR-120 / WDR-240 / WDR-480

Peripheral

Peripheral

Wattage :NA
Features :
20A redundant module
40A DC UPS module
20A/40A DIN Rail Buffer Module

Model
Redundancy Module 20A:DR-RDN20 / DRDN20
Redundancy Module 40A:DRDN40
Buffer Module:DBUF20 / DBUF40
UPS :DR-UPS40

AC/DC> Open Frame- Open Frame Switching Power Supply

Industrial – On Board Type

Industrial - On Board Type

Wattage :1W~90W
Features :
Assemble on the main PCB of the system
Miniature encapsulated type
No load power consumption<0.075W~0.1W
Working temperature:-30~+85℃ by models
Comply with EN55022 class B without any additional components
Various styles: PIN, SMD, Screw terminal style

Model
IRM-01 / IRM-02 / IRM-03 / IRM-05 /
IRM-10 / IRM-15 / IRM-20 / IRM-30 /
IRM-45 / IRM-60 / IRM-90

Industrial – Green PCB Type

Industrial - Green PCB Type

Wattage :15W~500W
Features :
3″ x 2″, 4″ x 2″, 5″ x 3″ complete sizes for choice
PFC models: EPP, ELP series;
Non-PFC models: EPS series
No load power consumption <0.1W~0.5W
Suitable for ErP regulated end systems

Model
2.5″ x 1.8″:EPS-15
3″ x 2″:EPS-25 / EPS-35 / EPS-45S / EPS-65S / EPP-120S
4″ x 2″:EPS-45 / EPS-65 / EPS-120 / EPP-100 / EPP-150 / EPP-200
5″ x 3″:EPP-300 / EPP-400 / EPP-500
Others:ELP-75

Industrial – PCB Type

Industrial - PCB Type

Wattage :5W~250W
Features :
PCB type, non-PFC for small wattage models
Multiple form factors for different installations: 7″ x 4.25”, 5” x 3”, 4” x 2”, slim type

Model

Single:PS-05 / LPS-50 / LPS-75 / LPS-100 / LPP-100 / LPP-150

Dual:PD-25 / PD-45 / PD-65 / RPD-65 / PD-110 / PID-250

Triple:PT-45 / PT-4503 / PT-65 / PT-6503 / RPT-65 / PPT-125

Medical – On Board Type

Medical - On Board Type

Wattage :5W~90W
Features :
Assemble on the main PCB of the system
Medical safety approved (2xMOPP)
Suitable for BF application with appropriate system consideration

Model

Encapsulated Type:PM-05 / PM-10 / PM-15 / PM-20 / MPM-05 / MPM-10 / MPM-15 / MPM-20 / MPM-30 / MPM-45 / MPM-65 / MPM-90

PCB Type:NFM-05 / NFM-10 / NFM-15 / NFM-20 / MFM-05 / MFM-10 / MFM-15 / MFM-20 / MFM-30

Medical – PCB Type

Medical - PCB Type

Wattage :30W~500W
Features :
Compact size
PCB type, non-PFC for small wattage models
Medical safety approved (2xMOPP)
Low leakage current
Suitable for BF application with appropriate system consideration for selected models

Model

Single:MPS-30 / MPS-45 / MPS-65 / MPS-200 / RPS-30 / RPS-45 / RPS-60 / RPS-65 / RPS-75 / RPS-120 / RPS-120S / RPS-160 / RPS-200 / RPS-300 / RPS-300-C / RPS-400 / RPS-500

Dual:MPD-45 / MPD-65 / MPD-200 / RPD-60 / RPD-75

Triple:MPT-45 / MPT-65 / RPT-60 / RPT-75 / RPT-160

Quad:MPQ-200

AC/DC> Specific Purpose- Specific Purpose Power Supply

ATX PC Power

ATX PC Power

Wattage :250W~300W
Features :
Low profile for 1U/2U for rack system
Suitable for industrial PC applications

Model:IPC-300

Security-DIN Type

Security-DIN Type

Wattage :40W~100W
Features :
With UPS function (need external batteries)
Suitable for security industry or battery backup systems
Assemble on industrial rail TS-35 / 7.5 or 15

Model:DRC-40 / DRC-60 / DRC-100

Security-Enclosed Type

Security-Enclosed Type

Wattage :35W~155W
Features :
With UPS function (need external batteries) for AD/ADD series
Suitable for security industry or battery backup systems

Model

Single:SCP-35 / SCP-50 / SCP-75

Dual:AD-55 / ADS-55 / AD-155 / ADS-155

Triple:ADD-55 / ADD-155

Security-PCB Type

Security-PCB Type

Wattage :35W~160W
Features :
With UPS function (need external batteries)
Suitable for security industry or battery backup systems
Built-in active PFC function (PSC-160)
Case available

Model:PSC-35 / PSC-60 / PSC-100 / PSC-160

Moving Sign Series

Moving Sign Series

Wattage :150W~400W
Features :
PFC: HSP, HDP series, UHP series
Non-PFC: HSN, NEL, ERP series
Light weight and low profile
HSP series—2.5V, 2.8V, 3.6V, 3.8V, 4.2V, 5V
HSN series—4.2V, 5V
NEL series—2.8V, 4.2V, 5V
HDP series—V1: 2.8V, V2:3.8V
ERP series—24V, 36V, 48V
UHP series—4.2V,4.5V,5V
Suitable for high efficiency moving sign applications
Conformal coating (HSP, HDP, NEL, HSN series)
Semi-potted and design against rain splash (ERP-350)

Model

Single:HSP-200 / HSP-300 / HSN-200 / HSN-300 / NEL-400 / UHP-200A / LHP-200 / ERP-200 / ERP-350 / ERPF-400

Dual:HDP-190 / HDP-240

AC/DC> PV Power- Programmable Power Supply

CSP Series

CSP Series

Wattage :3000W
Features :
Full range 180~264VAC input
Built-in active PFC function
High efficiency up to 93%
Built-in DC fans for forced air cooling
Output voltage/current programmable
Active current sharing up to 9000W(2+1)
Built-in remote ON/OFF control / Auxiliary power / power OK signal
Protections: short circuit/over current/over voltage/over temperature/ fan failure
5 years warranty

Model:CSP-3000

PHP Series Water-cooled

PHP Series Water-cooled

Wattage :3500W
Features :
Water-cooled heat dissipation technology
Output voltage and constant current level programmable
Support PMBus communication protocol (CANBus optional)
Support PSUs in parallel connection
Active current sharing, total system power up to 14000W (3+1)
Optional cold plate for quick implementation,ordering no.: HS-656

Model:PHP-3500

DPU Series

DPU Series

Wattage :3200W
Features :
Universal AC Input/ Full Range
Built-in Active PFC
High efficiency up to 94.5%
air cooling by built-in DC fan
Output voltage and constant current level programmable
Built-in OR-ing FET, support hot swap (hot) plug function
Protection: Short Circuit/ Overload / Over voltage/ Over temperature
Optional conformal coating
Safety approval: UL/TUV/EAC/CE/CB

5 years warranty

Model

DPU-3200:DPU-3200

SPV Series

SPV Series

Wattage :150W~300W
Features :
Built-in active PFC function
Output voltage programmable from 20~110%

Model:SPV-150 / SPV-300

RST Series

RST Series

Wattage :5000W~10000W
Features :
Single output power supply with 5000W / 10000W high wattage
3 phase input:3-wire / △196~305VAC or 4-wire / Y340~530VAC
Built-in active PFC function
High efficiency up to 91%
20000W with built-in parallel (active current sharing) function
Output voltage and constant current level programmable
5 years warranty

Model:RST-5000 / RST-10000

RSP-750~3000 Series

RSP-750~3000 Series

Wattage :750W~3000W
Features :
Programmable high power with active PFC function
Output voltage programmable
Constant current level Icc programmable (RSP-750/1600 only)
1U low profile (41mm) : RSP-750/1000/1600/2000,
2U profile : RSP-1500/2400/3000
Built-in current sharing (except RSP-750)
5 years warranty

Model

RSP-750 / RSP-1000 / RSP-1500 / RSP-1600 / RSP-2000 / RSP-2400 / RSP-3000

AC/DC> Rack Power- 19″ Rack Power Unit

RCP Series

RCP Series

Wattage :1000W~18000W
Features :
Complete rack mountable front end solution: rectifier and charger
1U low profile
19 inch rack shelf available

Model

Power:RCP-1000 / RCP-1600 / RCP-2000

Charger:RCB-1600

Rack:RCP-1U / RHP-1U / RKP-1U

Controller & Monitor :RCP-MU / RKP-CMU1

DRP Series

DRP Series

Wattage :3200
Features :
Complete rack mountable front end solution: rectifier and charger
1U low profile
19 inch rack shelf available

Model

Power:DRP-3200

Shelf:DHP-1UT

Charger:DBR-3200

AC/DC> Configurable- Modular Power Supply

NMP Series

NMP Series

Wattage :650W/1200W
Features :
Configurable/customizable/flexible power supply
Built-in active PFC function
4 slot output for NMP650
6 slot output for NMP1K2
NMP Series Selection Tool

Model:NMP650 / NMP1K2

UMP Series

UMP Series

Wattage :400W
Features :
Fan-less, 1U design
Modular design, with DC-DC module cards (NID35/65/100 series models)
Can be used as a single rail PSU
wide operating temperature ranges from -30 ~ +70 ° C
Meet OVC III requirements
Meet 2x MOPP isolation requirements, ideal for BF rated medical equipment

Model:UMP-400

MP Series

MP Series

Wattage :450W/650W/1000W
Features :
Configurable/customizable/flexible power supply
Built-in active PFC function
5 slot output for MP450/650,
7 slot output for MP1k0
75W/100W/150W/210W/300W/360W module available

Model:MP450 / MP650 / MP1K0

AC/DC> LED Driver- LED Driver

AP Series

AP Series

Wattage :8W~35W
Features :
90~264VAC input
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant voltage mode for APV series
Constant current mode for APC series
Suitable for indoor LED lighting and moving sign applications

Model

C.V.:APV-8 / APV-12 / APV-16 / APV-25 / APV-35

C.C.:APC-8 / APC-12 / APC-16 / APC-25 / APC-35

AP-E Series

AP-E Series

Wattage :8W~16W
Features :
180~264VAC input only
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant voltage mode for APV-E series
Constant current mode for APC-E series
Suitable for indoor LED lighting and moving sign applications

Model

C.V.:APV-8E / APV-12E / APV-16E

C.C.:APC-8E / APC-12E / APC-16E

ELG Series

ELG Series

Wattage :75W~300W
Features :
100~305VAC input range
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150 BE-Type)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting

5 years warranty

Model

C.V.+C.C.:ELG-75 / ELG-100 / ELG-150 / ELG-200 / ELG-240 / ELG-300

ELG-U:ELG-100U / ELG-150U

ELG-C Series

ELG-C Series

Wattage :75W~300W
Features :
100~305VAC input range
Constant current (C.C.) output
Constant power (C.P.) output
Built-in active PFC function
No load/standby power consumption <0.5W
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150-C BE-Type)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty

Model

C.C.:ELG-75-C / ELG-100-C / ELG-150-C / ELGT-150-C / ELG-200-C / ELG-240-C

C.P.:ELGC-300

FDL Series

FDL Series

Wattage :65W~100W
Features :
180~295VAC input range
Built-in active PFC function
Constant current design
Fully encapsulated with IP65 level (FDL-65)/IP67(FDLC-80)
No load power consumption <0.5W
3 years warranty

Model

C.C.:FDL-65

C.P. :FDLC-80 / FDLC-100 / FDHC-100

GSC Series

GSC Series

Wattage :18W~40W
Features :
90~277VAC input, built-in active PFC function
Constant current mode
Fully isolated plastic case with IP40 design
Class II design, without FG
IEC320-C8 inlet for B type,
2 pole EURO plug for E type
No load power consumption<0.15W
Suitable for indoor LED lighting

Model

IEC320-C8:GSC18B / GSC25B / GSC40B

EURO 2Pin:GSC18E / GSC25E / GSC40E

HBG(P) Series

HBG(P) Series

Wattage :60W~240W
Features :
Circular shape design:
HBG-60 : plastic case; HBG-100/160/240 : metal case; HBG-60P/100P/160P/240P : PCB type
90~305VAC input, built-in active PFC function [90~295VAC for HBG-60(P)]
Circular shape design: HBG-60: plastic case, HBG-100/160/240: metal case HBG-60P/100P/160P/240P:PCB type
IP67/IP65 design for indoor or outdoor installations for HBG-100/160/240
Built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) for HBG-100(P)/160(P)/240(P) B type
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HBG-100/160 only)
Suitable for LED high/low bay lighting, stage lighting and spot lighting
5 years warranty

HLG Series

HLG Series

Wattage :40W~600W
Features :
90~305VAC input, built-in active PFC function
96% high efficiency (HLG-600H)
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting, outdoor LED lighting and general outdoor applications with high IP requirement
IP68/-55℃ startup/10G vibration options available (Please contact MEAN WELL for details)
7 years warranty

Model

C.V.+C.C.:HLG-40H / HLG-60H / HLG-80H / HLG-100H / HLG-120H / HLG-150H / HLG-185H / HLG-240H / HLG-320H / HLG-480H / HLG-600H

HLG-C Series

HLG-C Series

Wattage :70W~480W
Features :
90~305VAC input, built-in active PFC function
Constant current output with high output voltage >60VDC
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming; smart timer dimming
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HLG-240H-C/320H-C only)
Suitable for LED street lighting and outdoor LED lighting
7 years warranty

HVG(C) Series

HVG(C) Series

Wattage :65W~650W
Features :
Wide input range 180~528VAC
Metal case, IP67/IP65 design for indoor or outdoor installations
Built-in active PFC function
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); timer dimming; smart timer dimming
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (except for HVG-65 and HVGC-65/100)
Suitable for LED street lighting and outdoor LED lighting applications
5 years warranty

Model

C.V.+C.C.:HVG-65 / HVG-100 / HVG-150 / HVG-240 / HVG-320 / HVG-480

C.C.:HVGC-65 / HVGC-100 / HVGC-150 / HVGC-240 / HVGC-320

C.P. :HVGC-480 / HVGC-650 / HVGC-1000

LDB-L/LW Series

LDB-L/LW Series

Wattage :300/350/500/600mA
Features :
Constant current DC/DC buck-boost LED driver
High efficiency up to 91%
Comply with EN55015 and FCC part 15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Suitable for buck-boost type lighting systems (additional mother board is required)
Pin, wire style for choice

Model

Buck-boost:LDB-L

LDH Series

LDH Series

Wattage :350/500/700/1050mA
Features :
Constant current output DC/DC step-up LED driver
High efficiency up to 95%
Comply with EN55015 without additional any components
PWM+analog dimming and remote ON/OFF control
Suitable for boost type lighting systems (Additional mother board is required)
Pin, wire style for choice

Model

Step-up:LDH-45(DA)

LP Series

LP Series

Wattage :18W~150W
Features :
90~264VAC input (except for 18W and 150W)
Slim plastic case with IP67 level
Economical design
Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)
-30~70℃ wide operation range
Suitable for economical LED lighting and moving sign applications
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)

Model

C.V.:LPL-18 / LPH-18 / LPV-20 / LPV-35 / LPV-60 / LPV-100 / LPVL-150 / LPV-150

C.C.:LPHC-18 / LPC-20 / LPC-35 / LPC-60 / LPC-100 / LPC-150

ODL Series

ODL Series

Wattage :45W~65W
Features :
Constant current output mode (ODLC Series)
Constant voltage output mode (ODLV Series)
Flicker free design( ODLC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for indoor LED lighting applications

Model

C.C.:ODLC-45(DA) / ODLC-65(DA)

C.V. :ODLV-45 / ODLV-65

LDD-L Series

LDD-L Series

Wattage :300/350/500/600/700mA
Features :
Constant current output DC/DC step-down converter
High efficiency up to 97%
Comply with EN55015 and FCC part15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully encapsulated with IP67 level for pin and wire style
Suitable for driving illumination LED
3 years warranty

Model

C.C:LDD-L

LDD-H Series

LDD-H Series

Wattage :300/350/500/600/700mA
Features :
Constant current output DC/DC step-down converter
High efficiency up to 97%
Comply with EN55015 and FCC part15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully encapsulated with IP67 level for pin and wire style
Suitable for driving illumination LED
3 years warranty

Model

C.C:LDD-H / LDD-H-DA

DLP-04 Series

DLP-04 Series

Wattage :4
Features :
90~295VAC full range input
Slim design
Plastic case with class II
No load/standby power consumption<0.5w( type L)
Withstand 300VAC surge input for 5 seconds
-20~+60℃ working temperature
Protections: short circuit / over voltage
Dimension: DLP-04R : 35*90*54.5 mm (W*H*D)
DLP-04L : 145*38*22 mm (L*W*H)
3 years warranty

Model

Din Rail Type:DLP-04R

Slim Type:DLP-04L

LDC Series

LDC Series

Wattage :35W~80W
Features :
Constant power output
Flicker free design
3 in 1 dimming:0~10Vdc、PMW signal or resistance
Built-in active PFC function
No load power consumption <0.5W
working temperature: -25~+90℃
Protections: short circuit /
UL/ENEC/TUV/CCC/CB/CE certified
5 years warranty

Model

C.P.:LDC-55 / LDC-35 / LDC-80

XLG Series

XLG Series

Wattage :25W~240W
Features :
Wide input range 100~305V AC
Constant power mode with adjustable output current
Built-in active PFC function and Efficiency up to 90%
Dimming functions with 3 in 1
Protections: Short circuit/Over voltage/Over temperature
Surge protection with 6KV(L/N-FG)/4KV(L-N)
5 years warranty

Model:XLG-25 / XLG-50 / XLG-75 / XLG-100 / XLG-150

XLG-200 / XLG-240

XBG Series

XBG Series

Wattage :100W~240W
Features :
Wide range 100~305VAC mains input
Circular shape with Patent Design(Patent No.CN201220314551) and Seal housing IP67
Built-in active PFC function and constant power mode
AC input cable with waterproof connector for flexible using
Surge protection: 6 KV /4KV
Protections: short circuit, over voltage, over temperature
Life time >50,000 Hrs. and 5 years warranty

Model:XBG-100 / XBG-160 / XBG-240

SLD Series

SLD Series

Wattage :50~80W
Features :
Wide input range 110~305V AC
Slim and linear housing design
Built-in active PFC function and efficiency up to 90%
Design with class 2/II and SELV
Protections: Short circuit/Over voltage/Over temperature
3 years warranty

Model:SLD-50 / SLD-80

LCM- BLE Series

LCM- BLE Series

Wattage :40W~60W
Features :
Output driver current adjustable by dip switch
Plastic housing and class II design without FG
Built-in active PFC function and Efficiency up to 90%
Dimming functions with Bluetooth Mesh and Push input
Protections: Short circuit/Over voltage/Over temperature
Surge protection with 2KV(L-N)

Model:LCM-25BLE / LCM-40BLE / LCM-60BLE

PLD Series

PLD Series

Wattage :16W~60W
Features :
16W: 90~135VAC or 180~295VAC
25W: 90~295VAC
40W/60W: 180~295VAC
Built-in active PFC function
Fully isolated plastic case with IP42 level
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting

Model

C.C.:PLD-16 / PLD-25 / PLD-40 / PLD-60

PLM Series

PLM Series

Wattage :12W~40W
Features :
110~295VAC input (180~295VAC input for E type)
Built-in active PFC function
Fully isolated plastic case with IP30 level
Class II design, without FG
Push terminal I/O
Constant current mode
No load power consumption<0.5W
Suitable for indoor LED lighting

Model

C.C.:PLM-12 / PLM-25 / PLM-40(E)

OWA Series

OWA Series

Wattage :60W~120W
Features :
IP67 design for power body
Class II design, without FG
2 pole USA plug (U type)/ EURO plug (E type)
90~264VAC input (180~264VAC input for OWA-120E)
No load power consumption <0.15W
Energy efficiency Level VI
E-Type: meet CoC Version 5 (OWA-60E/90E); comply with EU ErP
U-Type: comply with EISA 2007/DoE and NRCan
5 years warranty

Model

USA 2Pin:OWA-60U / OWA-90U / OWA-120U

EURO 2Pin:OWA-60E / OWA-90E / OWA-120E

PCD Series

PCD Series

Wattage :16W~60W
Features :
16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
Fully isolated plastic case with IP42 level
Built-in active PFC function
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting

Model

C.C.:PCD-16 / PCD-25 / PCD-40 / PCD-60

LPF Series

LPF Series

Wattage :16W~90W
Features :
90~305VAC input, built-in active PFC function (200~400VAC for LPFH-60/60D)
Fully isolated plastic case with IP67 level (16W optional)
Class II design, without FG
Built-in 3 in 1 dimming function for D type (1~10VDC, PWM signal or resistance)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPF-90/90D & LPFH-60/60D)
Suitable for LED lighting and moving sign applications
5 years warranty

Model

C.V.+C.C.:LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPFH-60 / LPF-90

C.C. (3 in 1 Dimming):LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPFH-60D / LPF-90D

NPF Series

NPF Series

Wattage :40W~120W
Features :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Class II design, without FG
No load/standby power consumption<0.15W (<0.5W for D type)
Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off ) for D type
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries [NPF-40(D)/-60(D)/-120(D) only]
Suitable for LED lighting and moving sign applications
5 years warranty

Model

C.V.+C.C.:NPF-40 / NPF-60 / NPF-90 / NPF-120

C.C. (3 in 1 Dimming):NPF-40D / NPF-60D / NPF-90D / NPF-120D

PWM Series

PWM Series

Wattage :40W~120W
Features :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Constant voltage PWM style output
Class II design, without FG
No load power consumption<0.5W
Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (PWM-40/60/120 only)
Suitable for LED strip lighting
5 years warranty

Model

C.V.:PWM-40 / PWM-60(DA) / PWM-90(DA) / PWM-120(DA)

PLC Series

PLC Series

Wattage :30W~96W
Features :
90~264VAC input, built-in active PFC function
Fully isolated plastic case with screw terminal style of I/O
Suitable for indoor LED lighting and moving sign applications

Model

C.C.:PLC-30 / PLC-45 / PLC-60

C.V.+C.C.:PLC-100

PLN Series

PLN Series

Wattage :20W~96W
Features :
90~295VAC input (90~277VAC for PLN-20), built-in active PFC function
Fully isolated plastic case with IP64 level
Suitable for indoor LED lighting and moving sign applications

Model

C.C.:PLN-20 / PLN-30 / PLN-45 / PLN-60

C.V.+C.C.:PLN-100

HLN Series

HLN Series

Wattage :40W~80W
Features :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP64 level
Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type
User adjustable output voltage and current level for A type
Suitable for indoor LED lighting and moving sign applications

Model

C.V.+C.C.:HLN-40H / HLN-60H / HLN-80H

LCM Series

LCM Series

Wattage :25W~60W
Features :
180~295VAC input for 40W/60W, 180~277VAC input for 25W
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
Suitable for indoor LED lighting applications

Model

3 in 1 Dimming:LCM-25 / LCM-40(EO) / LCM-60(EO)

DALI Dimming:LCM-25DA / LCM-40DA / LCM-60DA

LCM-U Series

LCM-U Series

Wattage :40W~60W
Features :
90~132VAC input only
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
Suitable for indoor LED lighting applications

Model

3 in 1 Dimming:LCM-40U(EO) / LCM-60U(EO)

DALI Dimming:LCM-40UDA / LCM-60UDA

IDL Series

IDL Series

Wattage :25W~65W
Features :
Constant current output mode (IDLC Series)
Constant voltage output mode (IDLV Series)
Flicker free design (IDLC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for indoor LED lighting applications

Model

C.C.:IDLC-25 / IDLC-45(DA) / IDLC-65(DA)

C.V. :IDLV-25 / IDLV-45 / IDLV-65

PLP Series

PLP Series

Wattage :30W~60W
Features :
90~264VAC input , built-in active PFC function
Suitable for built-in LED lighting systems

Model

C.C.:PLP-30 / PLP-45 / PLP-60

IDP Series

IDP Series

Wattage :25W~65W
Features :
Constant current output mode(IDPC Series)
Constant voltage output mode(IDPV Series)
Flicker free design(IDPC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for built-in LED lighting systems

Model

C.C.:IDPC-25 / IDPC-45(DA) / IDPC-65(DA)

C.V. :IDPV-25 / IDPV-45 / IDPV-65

HLP Series

HLP Series

Wattage :40W~80W
Features :
90~305VAC input, built-in active PFC function
Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance)
Suitable for built-in LED lighting systems

Model

C.C.:HLP-40H / HLP-60H / HLP-80H

AC/DC> LED Accessory – LED Accessories

DAP-04

DAP-04

Wattage :NA
Features :
90~305VAC input
Convert DALI signal to PWM signal
4 DALI addressable output channels
Meet DALI standards(IEC62386-101,102,207)
Suitable to use along with MEAN WELL’s AC/DC LED PSU with 3 in 1 dimming function

Model

DAP-04:DAP-04

LED Strips

LED Strips

Wattage :NA
Features :
12V LED Strips
Uniform brightness, high stability
Tailored length per application demand

PIR-045

PIR-045

Wattage :NA
Features :
Built-in Passive Infrared sensor module
MCU controller, no relay contact
Adjustable off-time delay / dimming level / sensitivity

Model:PIR-045

SDP-001

SDP-001

Wattage :NA
Features :
Smart timer dimming programmer

Model:SDP-001

SPD Series

SPD Series

Wattage :NA
Features :
10kA/20kA surge protection device
Line to Ground & Line to Line protected
Suitable for surge protection of LED drivers
IP66/67 design for indoor or outdoor installations

Model

20kA:SPD-20 / SPD-20HP

10kA :SPD-10-320S / SPD-10S-277S

WPD-06

WPD-06

Wattage :NA
Features :
EnOcean wireless control technology
Easy installation and configuration
6 protected and independent dimming output channels
Up to 128 wireless batteryless switches
Suitable for constant voltage lighting application
Up to 30 meter wireless distances

Model:WPD-06

AC/DC> Adaptor- External Switching Power Supply

Industrial – Desktop (Level V)

Industrial - Desktop (Level V)

Wattage :15W
Features :
Various DC plugs available
Energy efficiency level VI
No load power consumption <0.075W
Comply with EISA 2007, NRCan, MEPS and ErP
0~50℃ working temperature
A type: Class I (with FG), IEC320-C14;
B type: Class II (no FG), IEC320-C8
2 years warranty

Model

Class I:GS15A

Class II:GS15B

Industrial – Desktop (Level VI)

Industrial - Desktop (Level VI)

Wattage :18W~280W
Features :
Various DC plugs available
Global safety certificates for GST series :
UL, TUV, PSE, RCM, KC, SIRIM, BIS, EAC, BSMI, CCC
Energy efficiency Level VI
No load power consumption <0.075W~0.5W
Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC Version 5
Fanless design with -30~+70℃ working temperature
A type: Class I (with FG), IEC320-C14;
B type: Class II (no FG), IEC320-C8
3 years warranty

Model

Class I:GST18A / GST25A / GST40A / GST60A / GST90A /

GST120A / GST160A / GST220A / GST280A

Class II:GST18B / GST25B / GST36B

Triple:GP25A / GP25B / GP50A

Industrial – Wall-mounted (Level VI)

Industrial - Wall-mounted (Level VI)

Wattage :5W~60W
Features :
Various DC plugs available
Energy efficiency Level VI
No load power consumption <0.075W~0.15W
Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5
-30~+70℃ working temperature
2 pole USA plug(U type) / EURO plug(E type) / Interchangeable type for GE series
Slim design for SGA series
3 years warranty

Model

Fixed (USA 2 Pin):

GS05U-USB / GS06U / GS15U / GST18U / GST25U / GST36U

Fixed (EURO 2 Pin):

GS05E-USB / GS06E / GS15E / GST18E / GST25E / GST36E

Slim (USA 2 Pin):

SGA12U / SGA18U / SGA25U / SGA40U / SGA60U

Slim (EURO 2 Pin):

SGA12E / SGA18E / SGA25E / SGA40E / SGA60E

Slim (CH 2 Pin):

SGA40CH

Interchangeable:

GE12I / GE18I / GE24I / GE30I / GE40I

Medical – Desktop (Level VI)

Medical - Desktop (Level VI)

Wattage :18W~220W
Features :
Various DC plugs available
Medical safety approved (2xMOPP), BF application(B type only)
Energy efficiency Level VI (GSM06/18/25/36/40/60 5~9V: Level V)
No load power consumption <0.1W~0.15W
Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5
A type: Class I (with FG), IEC320-C14;
B type: Class II (without FG), IEC320-C8
3 years warranty

Model

Class I:

GSM40A / GSM60A / GSM90A / GSM120A / GSM160A / GSM220A

Class II:

GSM18B / GSM25B / GSM36B / GSM40B / GSM60B / GSM90B/ GSM120B / GSM160B / GSM220B

Medical – Wall-mounted (Level V / Level VI)

Medical - Wall-mounted (Level V / Level VI)

Wattage :6W~36W
Features :
Various DC plugs available
Medical safety approved (2xMOPP), BF applications
Energy efficiency Level VI (GSM06/12 and GSM18/25/36 5~9V for Level V)
No load power consumption <0.075W~0.3W
Comply with EISA/DoE, NRCan, MEPS, ErP and meet CoC Version 5
2 pole USA plug(U type)/EURO plug(E type) for GSM series, interchangeable type for GEM series
3 years warranty

Model

Fixed (USA 2 Pin):

GSM06U / GSM12U / GSM18U / GSM25U / GSM36U / GSM60U

Fixed (EURO 2 Pin):

GSM06E / GSM12E / GSM18E / GSM25E / GSM36E / GSM60E

Interchangeable:

GEM06I / GEM12I / GEM18I / GEM30I / GEM40I / GEM60I

Moistureproof – Desktop

Moistureproof - Desktop

Wattage :60W~120W
Features :
Various DC plugs available
IP67 design for power body
Energy efficiency Level VI
No load power consumption <0.15W
E-Type: EU ErP and meet CoC Version 5 (OWA-60E/90E);
U-Type: EISA 2007/DoE and NRCan
Class II (no FG)
5 years warranty

Model

USA 2 Pin:OWA-60U / OWA-90U / OWA-120U

EURO 2 Pin:OWA-60E / OWA-90E / OWA-120E

AC/DC> KNX- KNX

KNX Power

KNX Power

Wattage :20W~40W
Features :
EIB/KNX power supply with integrated choke
1∅, 180~264VAC input
No load power consumption <0.5W
Assemble on industrial rail TS-35 / 7.5 or 15

Model

Power:KNX-20E-640 / KNX-40E-1280

KNX to DALI Gateway

KNX to DALI Gateway

Wattage :NA
Features :
KNX proof gateway
Easy configuration & installation
Connect up to 64 DALI drivers
Built-in DALI power supply
LCD 2×12 display
Lighting control via the button
Lighting control via the integrated web server
Up to 16 DALI lighting groups setting
Up to 16 DALI scenes setting
3 year warranty

Model

Gateway:KDA-64

KNX-USB Interface

KNX-USB Interface

Wattage :NA
Features :
KNX-USB interface
No additional external power supply required
KNX commissioning, addressing and parameter settings
KNX protocol and system visualization
Diagnostic operations
Long messages up to 220 byte APDU
3 years warranty

Model

USB Interface:KSI-01U

KNX IP Router

KNX IP Router

Wattage :NA
Features :
KNX IP router
4 IP/TP tunnelings
No additional external power supply required
Universal Plug and Play
Telegram filtering
Built-in web front-end page
3 years warranty

Model

IP Router:KSR-01IP

KAA-8R Switching Actuator

KAA-8R Switching Actuator

Wattage :NA
Features :
8 channel actuator in a compact size
Suitable for various and mixed applications
For AX, C-load, capacitive and inductive type of loads
Program via ETS5.0 software
Manual control via Push button
Programmable various time and scene function
3 years warranty

Model

Actuator:KAA-8R

KAA-4R4V Dimming Actuator

KAA-4R4V Dimming Actuator

Wattage :NA
Features :
Dimming and switching LED driver and conventional electronic ballast
LED indicator for each channel
Linear or logarithmic dimming curve programmable via ETS software
Manual control via Push button on the panel
Programmable various time and scene function
3 years warranty

Model : KAA-4R4V

KNX Line Coupler

KNX Line Coupler

Wattage :NA
Features :
KNX TP Line Coupler/Repeater
Telegram filtering function
Long messages support up to 240 byte APDU
Trace the subline traffic
Diagnostic functions
Manual function
3 years warranty

Model:KSC

LCM-KN KNX-LED Driver

LCM-KN KNX-LED Driver

Wattage :25W~60W
Features :
Constant Current mode output with multiple levels selectable by dip switch
KNX protocol
Support emergency lighting (EL)
Integrated constant light output
Integrated KNX push button interface
Synchronization up to 10 units
Functions: Manual dim, operation hours, power consumption feedback, log/linear curve selection…etc

Model:LCM-25KN / LCM-40KN / LCM-60KN

PWM-KN Series

PWM-KN Series

Wattage :60W~120W
Features :
Constant Voltage PWM style output with user changeable frequency up to 4KHz compliant IEEE 1789-2015 no risk
Built-in active PFC function
Standby power consumption<0.5W
Integrated KNX control protocol
No need KNX-DALI gateway

Model:PWM-60-KN / PWM-120-KN

AC/DC> Charger- External Battery Charger

Stationary Charger

Stationary Charger

Wattage :300W~1600W
Features :
Chargers for lead-acid and Li-ion batteries
3-stage charging curve: PB-300/360, 2/3/8-stage charging curve: PB-600/1000, 3-stage charging curve suitable for harsh environment applications: HEP-600C
Intelligent charger with programmable 3-stage charging curve: RPB-1600/RCB-1600
5 years warranty for RPB-1600/RCB-1600, 6 years warranty for HEP-600C

Model

3 stage :PB-300 / PB-360

2/3/8 stage:PB-600 / PB-1000

Harsh Environment:HEP-600C

Programmable:RPB-1600 / RCB-1600 / DBU-3200

Green Desktop Charger

Green Desktop Charger

Wattage :120W~360W
Features :
ENP: Level VI power supply,
ENC: 3-stage programmable charger for lead-acid batteries
Universal AC input/ Full range

Model

Power:ENP-120 / ENP-180 / ENP-240 / ENP-360

Charger: ENC-120 / ENC-180 / ENC-240 / ENC-360

Adaptor Charger

Adaptor Charger

Wattage :30W~330W
Features :
Portable battery charger
Green adaptor with charging function

Model

Green :GC30B / GC30E / GC30U / GC120 / GC160 / GC220 / GC330

Single:PA-120 / PB-120 / PB-230

AC/DC> Accessory – Mounting Accessories

DRL-01

DRL-01

Wattage :
Features :
Suitable for case : 903, 905, 931, 932, 971

Model:DRL-01

DRL-02

DRL-02

Wattage :
Features :
Suitable for case : 901, 902, 906, 915, 916, 920

Model:DRL-02

DRL-03A

DRL-03A

Wattage :
Features :
Suitable for case : 980, 987

Model: DRL-03A

DRP-01

DRP-01

Wattage :
Features :
Suitable for case : 901, 902, 903, 906, 931, 932, 946

Model:DRP-01

DRP-01A

DRP-01A

Wattage :
Features :
Suitable for case : 203, 205, 978, 999

Model:DRP-01A

DRP-02

DRP-02

Wattage :
Features :
Suitable for case : 905, 915, 916, 920, 928

Model:DRP-02

DRP-03

DRP-03

Wattage :
Features :
Suitable for case : DRP-01, DRL-01~03

Model:DRP-03

DRP-04

DRP-04

Wattage :
Features :
Suitable for case : 203, 205, 978, 999

Model:DRP-04

MHS012

MHS012

Wattage :
Features :
Suitable for case : 206, 207, 912, 915, 916, 935, 939, 940, 977, 980, 982, 986, 987, 995

Model:MHS012

MHS013

MHS013

Wattage :
Features :
Suitable for case : 919, 926

Model:MHS013

MHS014

MHS014

Wattage :
Features :
Suitable for case : 212, 952

Model:MHS014

MHS025

MHS025

Wattage :
Features :
Suitable for case : 910

Model:MHS025

MHS026

MHS026

Wattage :
Features :
Suitable for case : 943

Model:MHS026

MHS027

MHS027

Wattage :
Features :
Suitable for case : 971, 931

Model:MHS027

DC/DC> Din Rail- Din Rail

DDR Series

DDR Series

Wattage : 15~240

Features :
4:1 wide input range(DDR-15~60)
2:1 input range(DDR-120~240)
Fanless design, cooling by free air convection
High efficiency up to 92.5%
Protections: short circuit / overload / over voltage / input reverse polarity / input under voltage
LED power indicator
Suitable for DIN rail types: TS-35/7.5 or TS-35/15
4KVdc I/O isolation (reinforced isolation)
Ultra slim dimensions
3 years warranty

DDRH Series

DDRH Series

Wattage : 60W
Features :
150~1500Vdc 10:1 ultra-wide input range
Potted with silicone gel, provides dust and moisture protection and free air convection cooling capability
-30~+80℃ ultra-wide temperature range ( >+55℃ de-rating)
Built-in DC OK relay contact
Protections: short circuit / overload / over voltage / over temperature / DC input under voltage / DC input reverse polarity
Adjustable output voltage (100~120%)

Model :DDRH-60

DC/DC> Module Type- Module Type

Medical-SIP Package

Medical-SIP Package

Wattage : 1~20W
Features :
SIP7, 2〞x 1〞package with international standard pinout
Operating temperature range -40~ +90°C
Medical safety approved (1xMOPP/2xMOOP) according to ANSI AAMI ES60601-1
Low patient leakage current <5 μA
Protection: Short circuit(3 second max.)
3 years warranty

Model :MDS01 / MDD01 / MDS02 / MDD02 / MDS15 / MDS20

SMD Package

SMD Package

Wattage : 1W~2W
Features :
SMD type
Single and dual output models

Model
Single:SBTN01 / SFTN01 / SFTN02
Dual:DETN01 / DETN02

SIP Package

SIP Package

Wattage : 1W~9W
Features :
Regulated and unregulated models
±10% or 2:1 wide input range
On board module type, assemble on the main PCB of the system

Model
Regulated :SPR01 / SPA01 / SPA02 / SPB03 / SPB05 / DPAN02 / DPBW03 / SPBW03 / SPBW06 / DPBW06 / SPAN02 / SPB09 / DPB09 / SPRN01 / DPRN01
Unregulated :SMU01 / SMU02 / SPU02 / SPU03 / SPU01 / DPU01

DIP Package

DIP Package

Wattage : 0.5W~3W
Features :
Regulated and unregulated models
±10% input range
On board module type, assemble on the main PCB of the system

Model
Regulated :SRS / SLC03 / DLC03
Unregulated:SUS01 / SMA01

DIP – 1.25″ x 0.8″ Footprint

DIP - 1.25

Wattage : 3W~20W
Features :
DIP24 package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC (standard), 3KVDC (option) isolation
Single and dual output models

Model
Single:SCW03 / SCW05 / SCW08 / SCW12 / SCWN03 / SCW20 / SCWN06 / RSDW08 / RSDW10 / RSDW20
Dual:DCW03 / DCW05 / DCW08 / DCW12 / DCWN03 / DCWN06 / RDDW08 / RDDW10 / RDDW20

DIP – 1″ x 1″ Footprint

DIP - 1

Wattage : 15W~30W
Features :
IP package
2:1 wide input
1.5KVDC isolation
Single output models
Remote ON/OFF control, remote sense, trimming output ±10% by models

Model :SKM15 / SKM10 / DKM10 / SKMW20 / DKMW20 / DKMW30 / SKMW30

DIP – 2″ x 1″ Footprint

DIP - 2

Wattage : 5W~50W
Features :
DIP package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC (standard), 3KVDC (option) isolation
Single and dual output models
Remote ON/OFF control, remote sense, trimming output ±10% by models

Model
Single:SLW05 / SKE10 / SKA15 / SKA20 / SKM30 / SKM50
Dual:DLW05 / DKE10 / DKA15

DIP – 2″ x 2″ Footprint

DIP - 2

Wattage : 15W~60W
Features :
DIP package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC isolation
Single, dual and triple output models

Model
Single:SKE15 / SDM30 / SKA40 / SKA60
Dual:DKE15 / DKA30
Triple:TKA30

Half-brick

Half-brick

Wattage : 75W~150W
Features :
Half-brick size (2.28” x 2.4” x 0.5”)
DIP package
2:1 wide input range, 1.5KVDC isolation
Built-in remote ON/OFF and remote sense
2.5V / 3.3V / 15V output available
Optional heat sink available

Model :MHB75 / MHB100 / MHB150

DC/DC> On Board Type – On Board Type

NID Series

NID Series

Wattage : 30W~100W
Features :
Non-isolated
3:1 wide input range
High efficiency up to 97%
Built-in remote ON/OFF control
Economical open frame design

Model
NID30 / NID60
NID35 / NID65 / NID100

NSD Series

NSD Series

Wattage : 5W~15W
Features :
4:1 wide input range
1~1.5KVDC isolation by models
Built-in remote ON/OFF contro
Low cost, high reliability

Model
Single:NSD05-S / NSD10-S / NSD15-S
Dual:NSD10-D / NSD15-D

DC/DC> PCB Type – PCB Type

PSD Series

PSD Series

Wattage : 5W~45W
Features :
2:1 wide input range
1.5~2KVAC isolation by models

Model :PSD-15 / PSD-30 / PSD-45

DC/DC> Enclosed Type – Enclosed Type

RSD Series

RSD Series

Wattage : 30W~300W
Features :
Compliance with EN50155 and EN45545-2 railway standard
2:1 or 4:1 wide input range
Isolation: 4000VDC
1U low profile
Half encapsulated

SD Series

SD Series

Wattage : 15W~1000W
Features :
2:1 wide input range (4:1 for SD-500/1000)
1.5~2KVAC isolation by models
1U low profile (41mm) for SD-1000
12V/0.25A auxiliary output for SD-500/1000
Built-in remote ON/OFF control and remote sense for SD-500/1000

DC/AC> Modified Sine Wave-

A301/302 Series

A301/302 Series

Wattage : 100W~2500W
Features :
Modified sine wave output, suitable for resistive load
Low cost
1 year warranty

DC/AC> True Sine Wave –

TN Series

TN Series

Wattage : 1500W~3000W
Features :
True sine wave with solar charger & by-pass function
High surge power up to 200%
Output voltage / frequency adjustable
Conformal coating
Computer-based monitoring software, recommended for Windows 7 and Windows 8 Operating System (English and Chinese version)
3 years warranty

Model :TN-1500 / TN-3000

TS Series

TS Series

Wattage : 200W~3000W
Features :
True sine wave output, suitable for motor related applications
High surge power up to 200%
Output voltage / frequency adjustable
Conformal coating (except for TS-200/400)
3 years warranty

IRC Series

IRC Series

Wattage :
Features :
Remote controller for TS-700~3000 , TN-1500~3000

Model :IRC1 / IRC2 / IRC3

DC/AC> Solar Inverter – Solar Inverter

ISI Series

ISI Series

Wattage : 500W
Features :
ISI-500: Modified sine wave with MPPT solar charger
ISI-501: True sine wave with MPPT solar charger
High surge power up to 200%
2 years warranty (ISI-500), 3 years warranty (ISI-501)

Model :ISI-501